How to remove and install the driveaxle and steering knuckle on Lexus RX350?

Before having the drive axle out, the drive axle hub nut and the wheel lug nuts must be loosened and the vehicle has to be raised and supported properly on jack stands before the wheel can be removed. Next it is necessary to loosen the wheel speed sensor from the knuckle and then remove the brake disc from the hub. While maintaining the bolts in position tighten them enough to free the strut from the steering knuckle arm but do not remove the bolts; unscrew the tie-rod end from the steering knuckle arm. Unscrew the ball joint-to-lower arml bolt and nuts to relieve the ball joint from the lower arm, pry the control arm with a pry bar to separate it from the ball joint. Here it is possible to unscrew the strut-to-knuckle bolts and to shift the drive axle away from the hub; it is recommended to thread a piece of wire over the end of the axle to keep it in place. Disconnect the steering knuckle from the strut, in case you have to eliminate the ball joint from the steering knuckle. For installation, position the knuckle and hub assembly to the right place and align the drive axle to the hub. Force the knuckle into the inner part of the strut flange, put on the bolts and nuts, but do not over tighten them at this stage. Place the nut ont the ball joint and bolt in the control arm then tighten it but halfway through in order to fix it. Connect the tie-rod to the steering knuckle arm and then torque the strut bolt nuts, ball joint to control arm bolt and nuts, and the tie-rod nut to the prescribed torque and replace all cotter-pin with new ones. Put the brake disc in the hub and tighten the caliper and the wheel speed sensor. Last, torque the drive axle/hub nut, final torque to be done once the vehicle is in the ground, then fit the wheels with the lug nuts, lower the vehicle ,and finally torque the lug nuts to the required torque. It is therefore necessary to fit the drive axle/hub nut in place, torque it to the necessary measure, and go on to staking the nut.

Genuine Lexus RX350 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Steering Knuckles found

View related parts
Lexus RX350 KNUCKLE, Steering, L
Part Number: 43212-0E040
$340.84 MSRP: $472.44
You Save: $131.60 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, LH; Knuckle
- Position: Driver Side
- Replaces: 43212-48020
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; 2GRFKS, 2GRFXS; GGL20L-CWZGBA, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GGL25L-CWZGBA, GYL20L-CWXGBA, GYL25L-AWXGBA, GYL25L-CWXGBA
View related parts
Lexus RX350 KNUCKLE, Steering
Part Number: 43211-0E040
$340.84 MSRP: $472.44
You Save: $131.60 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, RH; Knuckle
- Manufacturer Note: "F SPORT"*(F)
- Position: Passenger Side
- Replaces: 43211-48020
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; 2GRFKS, 2GRFXS; GGL20L-CWZGBA, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GGL25L-CWZGBA, GYL20L-CWXGBA, GYL25L-AWXGBA, GYL25L-CWXGBA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43202-0E040
$270.73 MSRP: $375.27
You Save: $104.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2024 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-CWXGBA, TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 KNUCKLE, Steering
Part Number: 43211-48020
$346.52 MSRP: $472.44
You Save: $125.92 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, RH
- Position: Passenger Side
- Replaced by: 43211-0E040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; 2GRFKS, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GYL25L-AWXGBA
View related parts
Lexus RX350 KNUCKLE, Steering, L
Part Number: 43212-48020
$346.52 MSRP: $472.44
You Save: $125.92 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, LH
- Position: Driver Side
- Replaced by: 43212-0E040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; 2GRFKS, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GYL25L-AWXGBA
View related parts
Lexus RX350 Knuckle, Steering, LH
Part Number: 43212-08020
$309.83 MSRP: $429.46
You Save: $119.63 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-CWAGKA, GSU35L-CWAGKA, MCU33L-CWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX350 Knuckle, Steering, RH
Part Number: 43211-0E010
$339.23 MSRP: $470.21
You Save: $130.98 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE, 2GRFXE; 2GRFE, 2GRFXE; GGL10L-CWTGKA, GGL15L-CWTGKA, GGL15L-CWZGKA, GYL10L-CWXGKA, GYL15L-CWXGKA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43201-48020
$284.27 MSRP: $394.04
You Save: $109.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-AWXGBA, AALH16L-AWXGBA, TALA10L-AWZGTA, TALH17L-AWTGTA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43202-48020
$284.27 MSRP: $394.04
You Save: $109.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-AWXGBA, AALH16L-AWXGBA, TALA10L-AWZGTA, TALH17L-AWTGTA
View related parts
Lexus RX350 Knuckle, Steering, LH
Part Number: 43212-58020
$329.75 MSRP: $457.07
You Save: $127.32 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43201-0E010
$241.31 MSRP: $334.49
You Save: $93.18 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-CWXGBA, TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43202-0E010
$241.31 MSRP: $334.49
You Save: $93.18 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-CWXGBA, TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 Knuckle, Steering, LH
Part Number: 43212-0E010
$330.91 MSRP: $458.69
You Save: $127.78 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE, 2GRFXE; 2GRFE, 2GRFXE; GGL10L-CWTGKA, GGL15L-CWTGKA, GGL15L-CWZGKA, GYL10L-CWXGKA, GYL15L-CWXGKA
View related parts
Lexus RX350 Knuckle, Steering, RH
Part Number: 43211-58020
$332.75 MSRP: $461.24
You Save: $128.49 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX350 KNUCKLE SUB-ASSY, ST
Part Number: 43201-0E040
$270.73 MSRP: $375.27
You Save: $104.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2024 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; A25AFXS, T24AFTS; AALH15L-CWXGBA, TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 Knuckle, Steering, RH
Part Number: 43211-08020
$309.83 MSRP: $429.46
You Save: $119.63 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-CWAGKA, GSU35L-CWAGKA, MCU33L-CWAGKA, MCU38L-CWAGKA

Lexus RX350 Steering Knuckle

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX350 Steering Knuckle available on LexusPartsNow.com. Our OEM Lexus RX350 Steering Knuckle come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus RX350 Steering Knuckle Parts Questions & Experts Answers

KNUCKLE, Steering
43211-0E040
Q: How to remove and install the driveaxle and steering knuckle on Lexus RX350?
A: Before having the drive axle out, the drive axle hub nut and the wheel lug nuts must be loosened and the vehicle has to be raised and supported properly on jack stands before the wheel can be removed. Next it is necessary to loosen the wheel speed sensor from the knuckle and then remove the brake disc from the hub. While maintaining the bolts in position tighten them enough to free the strut from the steering knuckle arm but do not remove the bolts; unscrew the tie-rod end from the steering knuckle arm. Unscrew the Ball Joint-to-lower arml bolt and nuts to relieve the ball joint from the lower arm, pry the Control Arm with a pry bar to separate it from the ball joint. Here it is possible to unscrew the strut-to-knuckle bolts and to shift the drive axle away from the hub; it is recommended to thread a piece of wire over the end of the axle to keep it in place. Disconnect the steering knuckle from the strut, in case you have to eliminate the ball joint from the steering knuckle. For installation, position the knuckle and hub assembly to the right place and align the drive axle to the hub. Force the knuckle into the inner part of the strut flange, put on the bolts and nuts, but do not over tighten them at this stage. Place the nut ont the ball joint and bolt in the control arm then tighten it but halfway through in order to fix it. Connect the tie-rod to the steering knuckle arm and then torque the strut bolt nuts, ball joint to control arm bolt and nuts, and the tie-rod nut to the prescribed torque and replace all cotter-pin with new ones. Put the brake disc in the hub and tighten the caliper and the wheel speed sensor. Last, torque the drive axle/hub nut, final torque to be done once the vehicle is in the ground, then fit the wheels with the lug nuts, lower the vehicle ,and finally torque the lug nuts to the required torque. It is therefore necessary to fit the drive axle/hub nut in place, torque it to the necessary measure, and go on to staking the nut.

Related Lexus RX350 Parts

Browse by Year

2025 Steering Knuckle 2024 Steering Knuckle 2023 Steering Knuckle 2022 Steering Knuckle 2021 Steering Knuckle 2020 Steering Knuckle 2019 Steering Knuckle 2018 Steering Knuckle 2017 Steering Knuckle 2016 Steering Knuckle 2015 Steering Knuckle 2014 Steering Knuckle 2013 Steering Knuckle 2012 Steering Knuckle 2011 Steering Knuckle 2010 Steering Knuckle 2009 Steering Knuckle 2008 Steering Knuckle 2007 Steering Knuckle