Lexus 28100-0A010 Starter Assy

You can Select Your Vehicle to check if 28100-0A010 fits your vehicle.

The wiring and connections of the starter solenoid should be checked and repaired if necessary.

For Highlander models with a 2GR-FKS engine, disconnect the cable from the negative battery terminal and remove the battery and battery tray. For 2GR-FE models, simply remove the battery. Then, remove the air filter housing and air intake duct. For 1999 through 2003 V6 models, remove the starter motor first, then disconnect the electrical connectors. For RX350 models with a 2GR-FKS engine, disconnect the transaxle shift control cable and remove the bracket mounting bolts and bracket from the transaxle. For 2004 and later models, disconnect the electrical connectors and remove the starter mounting bolts, then remove the starter.

Battery voltage to the solenoid should be checked and a bench test on the starter should be performed if necessary.

Start by disconnecting the cable from the negative battery terminal. Then, depending on the engine type and model year, you may need to remove the air filter housing and air intake duct or the battery and battery tray. Finally, detach the electrical connectors from the starter/solenoid assembly and remove the starter motor mounting bolts to remove the starter.

Yes, there is a core charge