Lexus 11102-29036 Head, Cylinder, LH

You can Select Your Vehicle to check if 11102-29036 fits your vehicle.

Slowly release the compressor and ensure the keepers seat properly.

The cylinder head should be cleaned with solvent and dried thoroughly before inspection. This ensures that any contaminants or residues are removed from the surface.

The cylinder head cleaning and inspection process should be started after completing the engine disassembly procedures, if a complete engine overhaul is being done.

To remove the cylinder heads, carefully lift each head off the engine block. If a head is stuck, you can use a wood block and hammer to aid in its removal. This process should be repeated for both cylinder heads if necessary.

Before accessing the cylinder head, you need to remove various components, including the throttle body, fuel injectors, fuel rail, intake manifold, exhaust manifold, timing belt, camshaft sprocket, upper idler pulley, upper rear timing belt cover, camshaft position sensor, camshafts, lifters, alternator, distributor, power steering pump, and various fittings, tubes, cables, hoses, and wires. These components are removed to provide clear access to the cylinder head for removal.