How do you remove the cooling fan assembly on Lexus RX350?

Remove the cable from the negative terminal of the battery and evacuate the cooling system, before disconnecting the upper hose of the radiator. In most 2015 and earlier models, the cooling fan removal procedure according to the manufacturer requires the removal of the radiator and fan assembly while it is possible to remove the engine cooling fans with the radiator untouched. Removing the parts needed for modification, depends on the model of the car, now for Lexus RX330 models remove the air intake duct, the plastic cover over the radiator support and the hood release latch. Twelve screws are used to fasten the radiator support to the car's frame and you should therefore unscrew the six bolts that hold the support in place above the radiator before you can easily pull of the support. Deroute the electrical connectors for the main as well as auxiliary fan motors, the fan electronic control unit turn off as well as any other tie harness connector connected to the fan shroud. First, undo the fasteners which join the fan/shroud with the radiator, then, release any hoses or wiring harnesses attached thereto and then pull the assembly out of the car. For all 2GR-FKS models built for 2016 and later and Lexus RX350 models, the radiator and fan shroud can be removed as a single unit. For Highlander models, the following components to be detached comprises of; radiator grille, air filter housing air inlet clips, and the inlet from the radiator support. Take out the battery then release the hood latch assembly, next, unbolt the upper hose for the radiator and the reservoir tank hose. Remove the cooling fan ECU ground cable and disconnect the electrical connector, and remove the wiring harness clip from the shroud. Three cooling fan retaining claws with engage the fan shroud to the radiator, release those claws and lifting the fan shroud assembly upwards, you have to pay attention to the locating of the three lower retaining tabs and slot position. When fastening the cooling fan shroud, the three lower tabs should be placed in the three low retaining slots provided at the base of the radiator. Take strong grips on the blades and take off its nut, the next process is to loose the fan motor from the shroud. When removing it, care has to be taken and the radiator support mounting bolts have to tightened to the right torque asDetailsService has to check the cooling system and fill it later.

Genuine Lexus RX350 Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Cooling Fan Assemblys found

View related parts
Lexus RX350 Fan
Part Number: 16361-20260
$65.61 MSRP: $88.72
You Save: $23.11 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFXE; 2GRFXE; GYL10L-AWXGKA, GYL10L-CWXGKA, GYL15L-AWXGKA, GYL15L-CWXGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-20250
$88.19 MSRP: $119.26
You Save: $31.07 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2; Fan Blade
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFXE; 2GRFXE; GYL10L-AWXGKA, GYL10L-CWXGKA, GYL15L-AWXGKA, GYL15L-CWXGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-0V070
$79.96 MSRP: $108.14
You Save: $28.18 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, LH; Fan Blade
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL20L-CWZGBA, GGL25L-CWZGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-0P420
$81.48 MSRP: $110.18
You Save: $28.70 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, LH; Fan Blade
- Manufacturer Note: TOWING PACKAGE-3500LBS
- Position: Driver Side
- Replaces: 16361-31480
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL20L-CWZGBA, 2GRFKS; GGL25L-BWZGBA, GGL25L-CWZGBA
View related parts
Lexus RX350 FAN ASSY, W/MOTOR
Part Number: 16360-F0240
$2331.76 MSRP: $3232.11
You Save: $900.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 16360-25060
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L | T24AFTS; T24AFTS; TALA10L-AWZGTA, T24AFTS; TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-AWTGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 FAN ASSY, W/MOTOR
Part Number: 16360-25060
$2331.76 MSRP: $3232.11
You Save: $900.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 16360-F0240
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L | T24AFTS; T24AFTS; TALA10L-AWZGTA, TALH17L-AWTGTA
View related parts
Lexus RX350 Fan
Part Number: 16361-20180
$68.56 MSRP: $92.71
You Save: $24.15 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007 Lexus RX350 | STD | 6 Cyl 3.3L | 3MZFE; 3MZFE; MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-0P400
$105.29 MSRP: $142.38
You Save: $37.09 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, RH; Fan Blade
- Manufacturer Note: TOWING PACKAGE-3500LBS
- Position: Passenger Side
- Replaces: 16361-31450
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL20L-CWZGBA, 2GRFKS; GGL25L-BWZGBA, GGL25L-CWZGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-31450
$107.00 MSRP: $142.38
You Save: $35.38 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, RH
- Manufacturer Note: TOWING PACKAGE-3500LBS
- Position: Passenger Side
- Replaced by: 16361-0P400
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL25L-BWZGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-31270
$83.46 MSRP: $111.06
You Save: $27.60 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2
- Manufacturer Note: TOWING PACKAGE-3500LBS(W/T.CONVERTER)
- Replaced by: 16361-0P180
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GGL10L-AWTGKA, GGL15L-AWTGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-31210
$67.00 MSRP: $89.15
You Save: $22.15 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 16361-0P100
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSU30L-AWAGKA, GSU35L-AWAGKA
View related parts
Lexus RX350 FAN ASSY, W/MOTOR
Part Number: 16360-25050
$2331.76 MSRP: $3232.11
You Save: $900.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly
- Replaced by: 16360-F0280
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.5L | A25AFXS; A25AFXS; AALH15L-AWXGBA, AALH16L-AWXGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-31480
$82.80 MSRP: $110.18
You Save: $27.38 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, LH
- Manufacturer Note: TOWING PACKAGE-3500LBS
- Position: Driver Side
- Replaced by: 16361-0P420
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL25L-BWZGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-31220
$93.58 MSRP: $124.51
You Save: $30.93 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2
- Replaced by: 16361-0P110
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSU30L-AWAGKA, GSU35L-AWAGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-31280
$64.65 MSRP: $82.71
You Save: $18.06 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: TOWING PACKAGE-3500LBS(W/T.CONVERTER)
- Replaced by: 16361-0P170
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GGL10L-AWTGKA, GGL15L-AWTGKA
View related parts
Lexus RX350 FAN ASSY, W/MOTOR
Part Number: 16360-F0280
$2331.76 MSRP: $3232.11
You Save: $900.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.5L | A25AFXS; A25AFXS; AALH15L-AWXGBA, A25AFXS; AALH15L-CWXGBA, AALH16L-AWXGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-0P160
$81.91 MSRP: $110.77
You Save: $28.86 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2; Fan Blade
- Replaces: 16361-31320
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GGL10L-AWTGKA, 2GRFE; GGL10L-CWTGKA, GGL15L-AWTGKA, GGL15L-CWTGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-31470
$105.61 MSRP: $142.81
You Save: $37.20 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, RH; Fan Blade
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GGL25L-AWZGBA, GGL25L-BWZGBA
View related parts
Lexus RX350 Fan
Part Number: 16361-0P180
$82.13 MSRP: $111.06
You Save: $28.93 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2; Fan Blade
- Manufacturer Note: TOWING PACKAGE-3500LBS
- Replaces: 16361-31270
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GGL10L-AWTGKA, 2GRFE; GGL10L-CWTGKA, GGL15L-AWTGKA, GGL15L-CWTGKA, GGL15L-CWZGKA
View related parts
Lexus RX350 Fan
Part Number: 16361-0P100
$65.93 MSRP: $89.15
You Save: $23.22 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Replaces: 16361-31210
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSU30L-AWAGKA, 2GRFE; GSU30L-CWAGKA, GSU35L-AWAGKA, GSU35L-CWAGKA

| Page 1 of 2 |Next >

1-20 of 33 Results

Lexus RX350 Cooling Fan Assembly

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX350 Cooling Fan Assembly available on LexusPartsNow.com. Our OEM Lexus RX350 Cooling Fan Assembly come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus RX350 Cooling Fan Assembly Parts Questions & Experts Answers

Fan
16361-0P150
Q: How do you remove the cooling fan assembly on Lexus RX350?
A: Remove the cable from the negative terminal of the battery and evacuate the cooling system, before disconnecting the upper hose of the Radiator. In most 2015 and earlier models, the cooling fan removal procedure according to the manufacturer requires the removal of the radiator and fan assembly while it is possible to remove the engine cooling fans with the radiator untouched. Removing the parts needed for modification, depends on the model of the car, now for Lexus RX330 models remove the air intake duct, the plastic cover over the radiator support and the hood release latch. Twelve screws are used to fasten the radiator support to the car's frame and you should therefore unscrew the six bolts that hold the support in place above the radiator before you can easily pull of the support. Deroute the electrical connectors for the main as well as auxiliary fan motors, the fan electronic control unit turn off as well as any other tie harness connector connected to the fan shroud. First, undo the fasteners which join the fan/shroud with the radiator, then, release any hoses or wiring harnesses attached thereto and then pull the assembly out of the car. For all 2GR-FKS models built for 2016 and later and Lexus RX350 models, the radiator and fan shroud can be removed as a single unit. For Highlander models, the following components to be detached comprises of; radiator grille, air filter housing air inlet clips, and the inlet from the radiator support. Take out the battery then release the hood latch assembly, next, unbolt the upper hose for the radiator and the reservoir tank hose. Remove the cooling fan ECU ground cable and disconnect the electrical connector, and remove the wiring harness clip from the shroud. Three cooling fan retaining claws with engage the fan shroud to the radiator, release those claws and lifting the fan shroud assembly upwards, you have to pay attention to the locating of the three lower retaining tabs and slot position. When fastening the cooling fan shroud, the three lower tabs should be placed in the three low retaining slots provided at the base of the radiator. Take strong grips on the blades and take off its nut, the next process is to loose the fan motor from the shroud. When removing it, care has to be taken and the radiator support mounting bolts have to tightened to the right torque asDetailsService has to check the cooling system and fill it later.