How to remove and install the rear hub and bearing assembly on Lexus RX330?

The following procedure applies to 2WD models only; for 4WD models, special tools and expertise are required to press the hub and bearing from the rear axle carrier, so this job should be left to a professional shop. However, the axle carrier and hub may be removed and the assembly taken to a dealer service department or other repair shop. The rear hub and bearing assembly is not serviceable; if found to be defective, it must be replaced as a unit. To begin removal, loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the disc from the hub and disconnect the wheel speed sensor electrical connector. Then, remove the four hub-to-axle carrier bolts by turning the hub flange to expose each bolt. After that, remove the hub and bearing assembly from its seat, maneuvering it out through the parking brake assembly. For installation, position the hub and bearing assembly on the axle carrier and align the holes in the backing plate before installing the bolts, using a magnet to guide them into position. Once all four bolts are installed, tighten them to the specified torque, then install the disc and caliper, followed by the wheel. Finally, lower the vehicle and tighten the lug nuts to the specified torque.

Genuine Lexus RX330 Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Wheel Hubs found

View related parts
Lexus RX330 Front Axle Hub Sub-Assembly, Left
Part Number: 43502-28100
$136.76 MSRP: $184.95
You Save: $48.19 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assy, Front Axle, Lh
- Position: Front Driver Side
- Replaced by: 43502-0E030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42410-48041
$332.19 MSRP: $452.91
You Save: $120.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh
- Position: Rear Driver Side
- Replaced by: 42410-0E050
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2005-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU35L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42460-0E010
$536.62 MSRP: $743.82
You Save: $207.20 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh; Hub & Bearing, Hub & Bearing Assembly
- Position: Driver Side
- Replaces: 42460-48030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, 3MZFE; GSU30L-CWAGKA, MCU33L-AWAGKA, MCU33L-CWAGKA
View related parts
Lexus RX330 Front Axle Hub Sub-Assembly, Left
Part Number: 43502-08010
$136.76 MSRP: $184.95
You Save: $48.19 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assy, Front Axle, Lh
- Position: Front Driver Side
- Replaced by: 43502-0E030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-CWAGKA, GSU35L-CWAGKA, MCU33L-CWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42410-0E020
$332.19 MSRP: $452.91
You Save: $120.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh
- Position: Rear Driver Side
- Replaced by: 42410-0E050
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L | 3MZFE; 3MZFE; MCU38L-CWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42460-48030
$545.56 MSRP: $743.82
You Save: $198.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh
- Position: Driver Side
- Replaced by: 42460-0E010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, MCU33L-AWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Right
Part Number: 42450-0E010
$536.62 MSRP: $743.82
You Save: $207.20 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Rh; Hub & Bearing, Hub & Bearing Assembly
- Position: Passenger Side
- Replaces: 42450-48030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, 3MZFE; GSU30L-CWAGKA, MCU33L-AWAGKA, MCU33L-CWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42410-48040
$332.19 MSRP: $452.91
You Save: $120.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh
- Position: Rear Driver Side
- Replaced by: 42410-0E050
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L | 3MZFE; 3MZFE; MCU38L-AWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Left
Part Number: 42410-0E021
$332.19 MSRP: $452.91
You Save: $120.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Lh
- Position: Rear Driver Side
- Replaced by: 42410-0E050
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2005-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU35L-CWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX330 Rear Axle Hub & Bearing Assembly, Right
Part Number: 42450-48030
$545.56 MSRP: $743.82
You Save: $198.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assy, Rear Axle, Rh
- Manufacturer Note: SPORT PACKAGE&W/MOON ROOF
- Position: Passenger Side
- Replaced by: 42450-0E010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU30L-AWAGKA, MCU33L-AWAGKA

Lexus RX330 Wheel Hub

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX330 Wheel Hub available on LexusPartsNow.com. Our OEM Lexus RX330 Wheel Hub come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus RX330 Wheel Hub Parts Questions & Experts Answers

Rear Axle Hub & Bearing Assembly, Left
42410-0E020
Q: How to remove and install the rear hub and bearing assembly on Lexus RX330?
A: The following procedure applies to 2WD models only; for 4WD models, special tools and expertise are required to press the hub and bearing from the rear axle carrier, so this job should be left to a professional shop. However, the axle carrier and hub may be removed and the assembly taken to a dealer service department or other repair shop. The rear hub and bearing assembly is not serviceable; if found to be defective, it must be replaced as a unit. To begin removal, loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the disc from the hub and disconnect the wheel speed sensor electrical connector. Then, remove the four hub-to-axle carrier bolts by turning the hub flange to expose each bolt. After that, remove the hub and bearing assembly from its seat, maneuvering it out through the parking brake assembly. For installation, position the hub and bearing assembly on the axle carrier and align the holes in the backing plate before installing the bolts, using a magnet to guide them into position. Once all four bolts are installed, tighten them to the specified torque, then install the disc and caliper, followed by the wheel. Finally, lower the vehicle and tighten the lug nuts to the specified torque.

Related Lexus RX330 Parts

Browse by Year

2006 Wheel Hub 2005 Wheel Hub 2004 Wheel Hub