×
- Live Chat
- 1-888-352-5786
My Garage
My Account
Cart
Genuine Lexus RX330 Ignition Lock Assembly
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Ignition Lock Assemblies found
Lexus RX330 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-60470$205.07 MSRP: $277.31You Save: $72.24 (27%)Ships in 1-2 Business Days
Lexus RX330 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-0E011$203.40 MSRP: $277.31You Save: $73.91 (27%)Ships in 1-3 Business Days
Lexus RX330 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-0E010$205.07 MSRP: $277.31You Save: $72.24 (27%)Ships in 1-3 Business Days
Lexus RX330 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-48160$322.34 MSRP: $439.48You Save: $117.14 (27%)Ships in 1-3 Business Days
Lexus RX330 Ignition Lock Assembly
Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX330 Ignition Lock Assembly available on LexusPartsNow.com. Our OEM Lexus RX330 Ignition Lock Assembly come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!
Lexus RX330 Ignition Lock Assembly Parts Questions & Experts Answers
- Q: How do you disconnect and remove the ignition switch and key lock cylinder on Lexus RX330?A: Disconnect the cable from the negative terminal of the battery. Remove the upper and lower steering column covers. Disconnect the electrical connector from the ignition switch by depressing the release tab and pulling off the connector. Remove the ignition switch retaining screws and detach the switch from the Ignition Lock Cylinder housing, then installation is the reverse of removal. Place the ignition key in the ACC position. If the vehicle has an immobilizer system, disconnect the electrical connector from the immobilizer module, then slide the immobilizer module and the Ignition Lock Cylinder illumination ring as a single assembly. Use an awl or punch to depress the Ignition Lock Cylinder retaining pin and remove the Ignition Lock Cylinder from the housing by ensuring the lock cylinder is in the ACC position, inserting the awl or punch into the small hole in the housing, pushing it in to depress the retaining pin, and pulling out the Ignition Lock Cylinder. To install the lock cylinder, depress the retaining pin and guide it into the housing until the retaining pin extends back into the locating hole. The remainder of installation is the reverse of removal. Remove the knee bolster panel and center trim panel. Using a trim tool, carefully pry the switch panel out from the instrument panel, then disconnect the electrical connector from the engine start switch and remove the switch from the back side of the panel, with installation being the reverse of removal.
