How do I perform a check, removal, and installation of the ignition switch and lock cylinder?

To check the ignition switch, follow these steps: Trace the wire from the ignition switch to the main wiring harness connector and disconnect it. Then, use an ohmmeter or self-powered test light to assess continuity between the specified switch terminals in different switch positions. If continuity doesn't match the specified values, replace the switch. For ignition switch removal, begin by disconnecting the battery's negative terminal cable and placing the ignition key in the ACC position. Proceed to remove the steering wheel and steering column covers. Then, take out the steering column switches and unplug the ignition switch wiring harness connectors. Detach the switch retaining screws and remove the switch assembly from the steering column. Installation involves reversing the removal process. To remove the Ignition Lock Assembly, depress the Ignition Lock Assembly retaining pin using a small screwdriver or punch, then pull the Ignition Lock Assembly straight out from the vehicle. To install the Ignition Lock Assembly, depress the retaining pin and guide the Ignition Lock Assembly into the steering column housing until the retaining pin locks into the locating hole. The rest of the installation process is the reverse of the removal steps.

Genuine Lexus ES300 Ignition Lock Assembly

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Ignition Lock Assemblies found

View related parts
Lexus ES300 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-33300
$273.41 MSRP: $372.77
You Save: $99.36 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 69057-33331
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2002-2003 Lexus ES300 | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCV30L-BEAGKA, MCV31L-BEAGKA
View related parts
Lexus ES300 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-33330
$273.41 MSRP: $372.77
You Save: $99.36 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: BRAZIL OR KOREA OR TAIWAN SPEC
- Replaced by: 69057-33331
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2003 Lexus ES300 | 6 Cyl 3.3L | 3MZFE; 3MZFE; MCV31L-BEAGKA
View related parts
Lexus ES300 Cylinder Set, Lock W
Part Number: 89073-33130
Product Specifications
- Other Name: Igniter Cylinder Set Lock W/Transmitter Housing (Cut Key); Cylinder & Keys
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cylinder & Key Set, Ignition W/Transponder
Part Number: 89703-33040
Product Specifications
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1997-2000 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-33310
Product Specifications
- Manufacturer Note: BRAZIL OR KOREA OR TAIWAN SPEC
- Replaced by: 69057-33311
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2002-2003 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV30L-BEAGKA
View related parts
Lexus ES300 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-33150
Product Specifications
- Other Name: Cylinder & Keys, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1997-1999 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cylinder & Key Set, Ignition Switch Lock
Part Number: 69057-33040
Product Specifications
- Other Name: Cylinder & Keys, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Cylinder Set, Lock W
Part Number: 89073-33160
Product Specifications
- Other Name: Igniter Cylinder Set Lock W/Transmitter Housing (Cut Key)
- Manufacturer Note: BRAZIL SPEC
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33290-C0
Product Specifications
- Manufacturer Note: BLACK,TRIM2#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33290-G0
Product Specifications
- Manufacturer Note: DK.SAGE,TRIM6#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33320-A0
Product Specifications
- Manufacturer Note: BRAZIL SPEC,IVORY,TRIM0#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33320-C0
Product Specifications
- Manufacturer Note: BRAZIL SPEC,BLACK,TRIM2#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33320-G0
Product Specifications
- Manufacturer Note: BRAZIL SPEC,DK.SAGE,TRIM6#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA
View related parts
Lexus ES300 Cylinder Set, Lock W/Transmitter Housing(Less Module)
Part Number: 89073-33290-A0
Product Specifications
- Manufacturer Note: IVORY,TRIM0#
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1999-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK

Lexus ES300 Ignition Lock Assembly

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus ES300 Ignition Lock Assembly available on LexusPartsNow.com. Our OEM Lexus ES300 Ignition Lock Assembly come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus ES300 Ignition Lock Assembly Parts Questions & Experts Answers

Cylinder Set, Lock W
89073-33130
Q: How do I perform a check, removal, and installation of the ignition switch and lock cylinder?
A: To check the ignition switch, follow these steps: Trace the wire from the ignition switch to the main wiring harness connector and disconnect it. Then, use an ohmmeter or self-powered test light to assess continuity between the specified switch terminals in different switch positions. If continuity doesn't match the specified values, replace the switch. For ignition switch removal, begin by disconnecting the battery's negative terminal cable and placing the ignition key in the ACC position. Proceed to remove the steering wheel and steering column covers. Then, take out the steering column switches and unplug the ignition switch wiring harness connectors. Detach the switch retaining screws and remove the switch assembly from the steering column. Installation involves reversing the removal process. To remove the Ignition Lock Assembly, depress the Ignition Lock Assembly retaining pin using a small screwdriver or punch, then pull the Ignition Lock Assembly straight out from the vehicle. To install the Ignition Lock Assembly, depress the retaining pin and guide the Ignition Lock Assembly into the steering column housing until the retaining pin locks into the locating hole. The rest of the installation process is the reverse of the removal steps.

Related Lexus ES300 Parts

Browse by Year

2003 Ignition Lock Assembly 2002 Ignition Lock Assembly 2001 Ignition Lock Assembly 2000 Ignition Lock Assembly 1999 Ignition Lock Assembly 1998 Ignition Lock Assembly 1997 Ignition Lock Assembly 1996 Ignition Lock Assembly 1995 Ignition Lock Assembly 1994 Ignition Lock Assembly 1993 Ignition Lock Assembly 1992 Ignition Lock Assembly